Titanium Alloy Filler Wire Manufacturers, Suppliers And Exporter
Titanium Alloys Filler Wire: Suitable for welding of Titanium used in highly corrosive environment including Chlorine and high temperature application, aircraft and Defence industry etc. The most common application of Commercial Pure Titanium Alloys Filler Wire is in aircraft industry, where tensile strength and weight ratios are so critical. Other uses would include cryogenic and petrochemical applications such as chemical process heat exchangers, pressure vessels and piping systems, electro chemical and chemical storage tanks.
Shivshakti Metal provide Best quality Alloy Filler Wire Manufacturers, Suppliers And Exporter at Ahmedabad, Bangalore, Chennai, Mumbai, Surat, Vadodara, Gujarat And all over India.
| Grade | Size (mm) |
Typical Analiysis of Filler Wire | Typical All Weld Mechanical Properties | Applications | ||||||||
| C | O | H | N | Fe | Ti | Y.P. N/mm2 (ksi) |
T.S. N/mm2 (ksi) |
EI. (%) |
I.V. J (kgf-m) |
|||
| Er-Ti-1 | 2.4 3.2 4.0 5.0 Length 1000 |
0.30 | 0.100 | 0.005 | 0.015 | 0.100 | Bal. | 172 (25) min |
241 (35) min |
24 min | – | For welding commercial pure titanium alloys commonly found in application requiring high temp. resistance and resistance to chemical re-agents. |
| Er-Ti-2 | 0.03 | 0.100 | 0.008 | 0.02 | 0.200 | Bal. | 345 (50) |
276 (40) |
20 | – | Most widely used titanium alloy for industrial application because of its good balance of strength. | |
| Er-Ti-5 | 0.05 | 0.180 | 0.015 | 0.03 | 0.300 | Bal. AI5.5-6.7 V 3.8-4.5 |
827 (120) min |
896 (130 ) min |
10 min | – | For high Fatigue strength, toughness,and are heat treable. | |
| Er-Ti-5 | 0.03 | 0.10 | 0.008 | 0.020 | 0.020 | Bal Pd 0.12-0.25 |
This alloy extends the use of titanium into mildly reducing media, to much higher chloride levels, or where the environment fluctuates between oxidizing and redu | |||||
