Logo
Filler wire , stellite rod, tungsten rod, ahmedabad Wire rod nickel wire, monel wire, titanium wire, gujarat Titanium wire, stainless steel sheet, india Filler wire, stainless steel pipes and rod, india stellite rod, tungsten rod, stainless steel pipe, india
Importers Stockist of...
Filler Wire Tig / Mig Stainless Steel
Aluminium Filler Wire
Titanium Alloys Filler Wires
Mild Steel & Low Alloy Steel Welding Filler Wire
Duplex Filer Wire
Nickel & High Nickel Alloy Filler Wire
Stellite Rods
Flux Cored Wire
Tungsten Rods
Products
Mild Steel & Low Alloy Steel Welding Filler Wire
Welding Filler       Grade Size
(mm)
Typical Analiysis of Filler Wire Typical All Weld Mechanical Properties Applications
C Si Mn Cr Ni Others Y.P.
N/mm2
(Ksi)
T.S.
N/mm2
(Ksi)
EI.
(%)
I.V.
oC,J
(oF,Ft-LBs.)
ER-70S-2 TIG
1.6
2.0
2.4
3.2
4.0
Length
1000
.
MIG
0.6
0.8
0.9
1.0
1.2
1.6
0.04 0.51 1.22 - - AI: 0.07
TI: 0.08
Zr: 0.06
560
(81)
620
(90)
28 -29o,190
(-20o,140)
For welding of mild and 490 N/mm2 steel. Espeically suited for root pass of pipes, offshore rigs and structural
ER-80S-B2 0.09 0.48 0.55 1.35 - Mo
0.55

It is designed for welding on 1-1/4 Cr
½ Mo steels
ER-80S-B8
(505)
0.06 0.25 0.55 9.02 - Mo
1.08
410
(59)
590
(86)
32 0o,220
(32o,162)
750oC
*2hr
For welding of 9% Cr-1% Mo steel
ER-80S-B6
(502)
0.10 0.28 0.65 5.21 0.45 Mo
0.52

It is designed for welding of material of similar composition for high temperature service conditions.
ER-80S D2 0.09 0.016

1.72

- 0.12 Mo
0.52
        It is low alloy steel wire with 2% Manganese and 0.5% molybdenum as alloying elements. The weld metal of this wire have moderately high strength with adequate low temperature toughness.
ER-80S-Ni1 0.10 0.45 1.05 0.12 0.95 Mo
0.28
        It is used for welding low alloy high strength steels requiring good toughness at temperature as low as -40 degree F.
ER-90S-B3 0.09 0.48 0.62 2.55 - Mo
1.10
        It is designed for welding 2-1/4 Cr 1 Mo steels
ER-90S-B9 0.09 0.25 1.03 8.38 0.67 Mo
0.85
        It is designed to weld high temperature steels for hot hydrogen services and is suitable for 9% Chromium steels such as P91, T91 and F91.