Logo
Filler wire , stellite rod, tungsten rod, ahmedabad Wire rod nickel wire, monel wire, titanium wire, gujarat Titanium wire, stainless steel sheet, india Filler wire, stainless steel pipes and rod, india stellite rod, tungsten rod, stainless steel pipe, india
Importers Stockist of...
Filler Wire Tig / Mig Stainless Steel
Aluminium Filler Wire
Titanium Alloys Filler Wires
Mild Steel & Low Alloy Steel Welding Filler Wire
Duplex Filer Wire
Nickel & High Nickel Alloy Filler Wire
Stellite Rods
Flux Cored Wire
Tungsten Rods
Products
Aluminium Filler Wire
Grade Size
(mm)
Typical Analiysis of Filler Wire Typical All Weld Mechanical Properties Applications
AI Si Mn Fe Mg Cu Y.P.
N/mm2
(Ksi)
T.S.
N/mm2
(Ksi)
EI.
(%)
as welded brinnel hardness
ER4043 TIG
1.6
2.0
2.4
4.0
Length
1000
MIG
0.6
0.8
0.9
1.0
1.2
1.6
Bal. 4.5-6.0 0.05
max
0.80
max
0.05 0.30
max
- 200
(29)
- - For welding 3003,3004,5052,6061, 6063 and casting alloys 43, 355, 356 and 214.
ER4047 Bal. 11.0-
13.0
0.15 max 0.80 max 0.10 0.30 max - 190
(27.5)
- - For welding 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005and cast alloys 710.0 and 711.0. Provides good corrossion resestance.
ER5356 Bal. 0.25 0.05-0.20 0.40 max 4.5-5.5 0.10 max - 26
(3.8)
- - For welding 5050, 5052, 5083, 5356, 5454, 5456. Provides much better corrossion resistance to salt water.
ER1100 99 min. Fe&Si 0.95 max 0.50 max Fe&Si0.95 - 0.05-0.20 - 93
(13.5)
- - For architectural or decorative application. For welding 1100, 3003, 3003 to 1060, to 1080, to 1350.
ER5183 Bal 0040 0.50-1.0 0.40 4.3-5.2 0.10 -       It is most frequently used on 5083 base plate. It is also used to weld 6061, 6063, 5086, 7005 and 7039 alloys